Rice-lake SCT-10 Manuel d'utilisateur télécharger pdf (Page 32)

28 SCT Weight Transmitter Operator’s Manual

2.7 Test

1. Press and hold , then press . CALIb will be displayed.

2. Press or until tEst is displayed, press . The currently

programmed value is displayed.

3. Press or until desired parameter is displayed, press .

4. For In and NU-CEL, current reading is displayed, press .

For Out, press until corresponding value of the out you want to

change is flashing, press to change the value, press .

5. Press twice to exit set-up menu.

In 1

In 2

nE-LO *

(In 2

default)

(NET/GROSS): by closing this input for less than one

second, it performs a SEMI-AUTOMATIC TARE and the

display will show the net weight. To display the gross

weight again, hold the NET/GROSS input closed for 3

seconds.

2ErO *

(In 1

default)

By closing the input for less than one second, the

weight is set to zero (see Section 3.3 “Semi-Automatic

Zero (Weight Zero-setting For Small Variations)” on

page 33).

PEAH With the input closed the maximum weight value

reached remains on display. Opening the input the

current weight is displayed.

PLC Closing the input no operation is performed, the input

status may however be read remotely by way of the

communication protocol.

COntin Closing the input for less than one second the weight is

transmitted via the serial connection according to the

fast continuous transmission protocol one time only

(only if contin is set in the item serial).

COEFF When the input is closed the weight is displayed based

on the set coefficient (see Section 2.1.6 “Setting Units

of Measure” on page 30 and Section 2.1.7 “Display

Coefficient” on page 31), otherwise the weight is

displayed.

- indicates default value.

Parameter Choices Description

Table 2-8. Output and Input Menu

ESC

TARE

ESC

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Rice-lake SCT-10 Manuel d'utilisateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Échelles Rice-lake SCT-10