Rice-lake Counterpart Configurable Counting Indicator - Inst Manuel d'utilisateur télécharger pdf (Page 14)

8 Counterpart Counting Scale Indicator

2.2 Scale Base Assembly (if purchasing the scale base separate from indicator)

Do not turn the scale upside down. Always work with the scale on its side. Damage to the load cell can

occur if the scale is turned upside down.

Set up the scale on a stable, level surface.

2.2.1 Locking and Unlocking - S-XL Scale Base

The Counterpart S-XL scale base is delivered in a locked position to prevent damage to the load cells during

shipment. The scale base uses either one setscrew for the single-platform scale or two setscrews for the dual-

platform scale. The setscrews are located on the bottom of the base and must be removed before the scale is put

into service. Use the following procedure to unlock the scale base.

1. Turn the scale on its side.

Figure 2-1. Location of Load Cell Setscrews for Single and Dual-Platform Scales (DIGI S-XL Scale Base shown)

2. Remove the load cell setscrew using a hex wrench for the dual platform setscrews or a Phillips head

screwdriver for the single platform scale.

3. Tape the setscrews to the bottom of the scale or store in a safe place for possible future use.

2.2.2 Locking and Unlocking - S-YC Scale Base

The Counterpart S-YCL scale base is delivered in a locked position to prevent damage to the load cells during

shipment. The scale base uses two setscrews. The setscrews are located on the bottom of the base and must be

removed before the scale is put into service. Use the following procedure to unlock the scale base for the S-YC

Model.

1. Turn the scale on its side.

Figure 2-2. Location of Load Cell Setscrew for the DIGI S-YC Scale Base

2. Remove the load cell setscrews using a hex wrench which is included.

3. Tape the setscrews to the bottom of the scale or store in a safe place for possible future use.

Important

Dual platform load cell

setscrews

Single platform load

cell setscrews

Setscrew location

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 111 112

Pas de commentaire

Rice-lake Counterpart Configurable Counting Indicator - Inst Manuel d'utilisateur Page 14