Rice-lake 920i Programmable HMI Indicator/Controller - WLAN Manuel d'utilisateur télécharger pdf (Page 6)

6 WLAN Installation Instructions

this case, we’re setting up the WLAN options so press 4 and press Enter as shown in Figure 10.

Figure 10. Change Setup Screen

View the current configuration by pressing Enter from the Change Setup menu. To enter a value for a parameter,

type the value and press Enter. To confirm a current value, press Enter (without inputted parameters).

8. Enter the desired Topology for the WLAN option.

Figure 11. Topology Screen

The two choices are:

• 0 = Infrastructure

• 1 = AdHoc.

Select 0 for your choice and press Enter.

9. The next menu choice is Network Name as shown below.

Figure 12. Network Name Screen

Enter your wireless network name as your menu choice and press Enter. This identifies the network that the

wireless option will run on.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Rice-lake 920i Programmable HMI Indicator/Controller - WLAN Manuel d'utilisateur Page 6